Setting up your router with a double master socket

1. Disconnect everything from your double master socket, you will not need a microfilter.
2. Connect your phone cable to the phone port on the master socket.
3. Connect one end of the RJ11/DSL cable to the data port on the master socket, and the other end to the port on the back of the router labelled, ‘DSL’.
4. Ensure the two part power supply unit is assembled correctly before connecting to the mains.
5. Turn on the mains and push the power button on the back of your router.
6. LED lights will start flickering whilst the router powers up. The colour and stability of the lights show the status of the router and will take time to stabilise.
7. When the broadband and internet lights are solid green, setup is complete.